FX Accessoires

Pressure gauge 28 mm for the FX Wildcat and FX Streamline
This 28 mm pressure gauge can be used as an replacement for the FX Wildcat and FX Streamline factory pressure gauge (Wika) mounted at the front of the pressure tube. It is made of solid brass, chrome plated with a wide dial scale.
The gauge comes with an o-ring that can replace the plastic washer that is under the factory pressure gauge. Due to this o-ring there is enough movement to line up the gauge perfectly in eye position.

* Despite the fact that the scale of the pressure gauge indicates up to 300 bar, you should never exceed the factory advised fill pressure of your rifle!

FX Quick Connect Fill Probe
We all know the issue of having more airrifles and they all have different types of fill probes. Huma-Air now offers a solution for it.
We have a FX Quick Connect Fill Probe with a foster male quick connect coupler, so you can now easily swap fill probes in a second, when you want to fill several types of airrifles. With the 4 different base models of Quick Connect Fill Probes available in our store, you are able to fill about 90% of the rifle's brands.

This model fill probe will also fit:

• Hatsan
• Kral Airguns
• Webley
• Evanix
• RWS Airguns
• Jkhan
• Logan
• RWS
• AGS

As 200/300 bars of pressure is seriously dangerous, we choose for high quality materials only; we make our Huma Quick Connect Fill Probes out of one massive piece of stainless steel. This ensures the highest durability and safety, not to be compared with the soft brass and silver plated plugs on the market.

At the end of your fill hose you can attach one of our foster female quick coupler what makes it easy to swap fill probes in a second.
Also a lot of rifles (Marauder, FX Impact, Brocock, Daystate) are equipped with a foster male coupler.

FX Wildcat MKII Tuning Regulator
This FX Wildcat MKII (MK2) tuning regulator made by Huma is specially designed as a "one on one" replacement for the factory regulator. It can be placed into the pressure tube within a minute and replaces the original regulator. The Huma FX Wildcat regulator is very consistent over the total pressure range of the pressure tube and solves all the known issues of the original regulator. Made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
Your FX Wildcat regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in. 

FX Wildcat MKII Tuning Regulator
This FX Wildcat tuning regulator made by Huma is specially designed as a "one on one" replacement for the factory regulator.
It can be placed into the pressure tube within a minute and replaces the original regulator. The Huma FX Wildcat regulator is very consistent over the total pressure range of the pressure tube and solves all the known issues of the original regulator. Made of high grade aircraft aluminium in combination with bronze components

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
Your FX Wildcat regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in. 

Mini pressure gauge 23mm for FX Wildcat or FX Streamline
This mini pressure gauge is to check the output pressure of your regulator.

How does it work
Unscrew the pressure tube of your rifle. Dryfire the rifle to make sure there is no pressure left in the action.
remove the brass de-presurize screw on the side of the action and replace it with our test gauge.
Then replace the pressure tube again and you can check the output pressure of the regulator after every shot.

Huma-Air FX FX Streamline Tuning Regulator
This Huma tuning regulator is specially designed as a "one on one" replacement regulator for the FX Streamline airrifle. It can be placed into the pressure tube within a minute. The regulator is very consistent over the total pressure range of the pressure tube and solves all the known issues of the original regulator. Vented to the atmosfere for the best performance.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
Your FX Streamline regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Huma-Air Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in. 

Huma-Air FX Impact Tuning Regulator
This FX Impact regulator by Huma-Air is specially designed as a "one on one" replacement regulator for your FX Impact, FX Impact X  or FX crown. It is compatible with factory regulators that use 8 mm diameter belleville springs, produced untill 03 - 2018

Unfortunately the fixed limited space in the FX Impact action was not sufficient for our standard Huma-Air Regulator design, so we had to comply our design to the ratio's used by FX. Never the less we have accomplished to make a great replacement regulator that will solve the known issues of the factory regulator.

What can you expect of the Huma-Air FX Impact Regulator:

• The recovery time in between shots is much faster compared to the factory regulator.
• This Huma FX impact regulator can be adjusted higher in pressure from the outside while the rifle is under pressure.
• Equal as the factory reg, if you want to lower the pressure, the rifle needs to be de-pressurized first otherwise the valve gets damaged.
• By using another type of material for the valve and piston, there is no way you can damage the piston because of faulty pressure adjustments.
• We also supply some extra valves, so in case you adjust the pressure to the wrong side, and you damage the valve, it can be replaced without any extra costs.

Pressure settings
The design of the regulator makes it posible for setting it exactly to your wishes while placed in your FX impact by watching the output pressure gauge on you rifle. We have three pressure ranges for the FX Impact regulator available:

• The High Pressure range, 80-150 Bar. This will suit all calibers within the normal FAC range.
• The Extra High Pressure range, 145-190 Bar. When you want to have extreme settings. Please note: raising the pressure above the factory set pressure is on your own risk!
• The Low Pressure range, 50-90 Bar. Especially for sub 12 ft/lbs models.

Please note: you need to do the stacking of the belleville springs on the piston yourself according to the manual, because we do not want to risk them to fall off the piston during transport.

Huma-Air Quality Control
Huma-Air regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy.

* Gelieve hieronder aan te geven welke power setting u wilt. 

Huma-Air FX Royale Tuning Pressure Regulator
This FX Royale tuning regulator made by Huma is specially designed as a "one on one" replacement regulator for the FX Royale airrifle.
It can be placed into the action within a minute without any modification.

Due to the clear pressure scale it is fully adjustable over the complete pressure range of 100-150 bar. The FX Royale regulator for the .30 with 150 bar output will give about 270 m/s speed with 44,75 gn pellets, which is 78 ft/lbs - 105 J of power. If you would like higher pressure settings, an Extra High Pressure model is available up to 170 bar output range for the .30

The FX Royale Regulator made by Huma is very consistent over the total range and solves all the known issues of the original regulator. It is made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
 

Huma-Air FX Bobcat Tuning Pressure Regulator
This FX Bobcat tuning regulator made by Huma is specially designed as a "one on one" replacement regulator for the FX Bobcat airrifle.
It can be placed into the action within a minute without any modification.

Due to the clear pressure scale it is fully adjustable over the complete pressure range of 100-150 bar. The FX Bobcat regulator for the .30 with 150 bar output will give about 270 m/s speed with 44,75 gn pellets, which is 78 ft/lbs - 105 J of power.
If you would like higher pressure settings, an Extra High Pressure model is available up to 170 bar output range for the .30

The FX Bobcat Regulator made by Huma is very consistent over the total range and solves all the known issues of the original regulator. It is made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
 

Huma-Air FX Gladiator MKII Tuning Pressure Regulator
This FX Gladiator MKII tuning regulator made by Huma is specially designed as a "one on one" replacement regulator for the FX Gladiator MKII airrifle. It can be placed into the action within a minute without any modification.

Due to the clear pressure scale it is fully adjustable over the complete pressure range of 100-150 bar. The FX Gladiator MKII regulator for the .30 with 150 bar output will give about 270 m/s speed with 44,75 gn pellets, which is 78 ft/lbs - 105 J of power.
If you would like higher pressure settings, an Extra High Pressure model is available up to 170 bar output range for the .30

The FX Gladiator MKII Regulator made by Huma is very consistent over the total range and solves all the known issues of the original regulator. It is made of high grade aircraft aluminium in combination with bronze components.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
 

Mini pressure gauge 23 mm. with G1/8 BSP treads suitable and a 250 bar scale.
The housing is made of solid metal that is chrome plated. This 23mm pressure gauge can also be used to replace the original FX Impact manometer and BSA pressure gauges. It has a 1/8 BSP treaded bottom connection, which makes it suitable for several other brands too. An o-ring is included for proper sealing on most airguns. 

This gauge is an one on one replacement for:

• FX Impact
• BSA R10
• BSA Ultra SE
• BSA Scorpion SE

* This is an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!

Mini pressure gauge 26 mm. Round model.
This 26 mm round pressure gauge can be used as an replacement for several FX pressure gauges. Made of solid brass body, with a wide dial scale. The gauge comes with an o-ring that can replace the plastic washer that is under the factory pressure gauge. Due to this o-ring there is enough movement to line up the gauge perfectly in eye position.

* This is an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!