info

Je hebt het minimaal aantal bereikt

Winkelwagen (0)

Er zijn nog geen producten in uw winkelwagen geplaatst.

Manometers



Bezig met laden...
Edgun EDMU Elektronische Meet Unit

Snel bekijken

(0)
Edgun EDMU Elektronische Meet Unit

Edgun EDMU Elektronische Meet Unit

(0)
€ 89,00

De EDMU (Electronische Digitale Meet Unit) is een digitale manometer van Edgun die niet alleen de luchtdruk aangeeft, maar ook het aantal schoten. Deze digitale drukmeter past op elke aansluiting met 1/8 BSP draad, heeft een diameter van 26mm en een dikte van 19mm.

* Onderaan deze pagina kunt u een handleiding in PDF vorm vinden.

Huma-Air BSA vervangende drukmeter

Snel bekijken

(0)
Huma-Air BSA vervangende drukmeter

Huma-Air BSA vervangende drukmeter

(0)
€ 14,95

Mini pressure gauge 23 mm. for BSA Airrifles.

This 23 mm mini pressure gauge is an one on one replacement for several BSA factory pressure gauges like the BSA R10, BSA Ultra SE and BSA Scorpion SE. 
Made of solid steel, chrome plated with a 250 bar wide dial scale.
The gauge comes with a oring what can replace the plastic washer what is under the factory pressure gauge. Due to this o-ring there is enough movement to line up the gauge perfectly in eye position.

Huma-Air digitale drukmeter G1/4

Snel bekijken

Huma-Air digitale drukmeter G1/4

Huma-Air digitale drukmeter G1/4" (250 bar werkdruk)

(0)
€ 59,95

Digital pressure gauge, 1/4" BSP bottom connection and 250 bar working pressure.
Although this gauge is an "economical digital pressure gauge", we used them in our workshop for years and they are accurate and reliable. They have a high-precision sensor and they show the pressure accurately in real time. This digital pressure gauge has several functions like;  zero clearing, backlight, on/off button, units selection and low voltage alarm.
These gauges can also be used in combination with the Huma-Air regulator testers.
 
Technical specifications:

  • Pressure Range: 0-250bar / 25Mpa / 3600PSI
  • Accuracy: 0.4% FS
  • Long-term Stability: 0.4% FS/year
  • Overload capacity: <10MPa 200%; ≥10MPa 150%
  • Supply: 3V two A battery, not included.
  • Battery life: 12-24 months
  • Samping frequency: 2T/S
  • Backlight color: white
  • Housing: 304SS
  • Acc: 1%
  • Protection Class: IP65
  • Functions: backlight, on/off, units change, zero clearing
  • Size:100x66x37 (mm)

Huma-Air drukmeter 65mm vloeistof gevuld (G1/4 BSP)

Snel bekijken

Huma-Air drukmeter 65mm vloeistof gevuld (G1/4 BSP)

Huma-Air drukmeter 65mm vloeistof gevuld (G1/4 BSP)

(0)
€ 24,95

Huma-Air 65mm stainless steel pressure gauge for the professional tuners among us
Liquid filled pressure gauge for to be used for several purposes like tesing regulators, fillsets etc.
Maximum working pressure: 200 Bar / 3000 PSI.

* This is an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!

Huma-Air FX Impact vervangende drukmeter

Snel bekijken

(0)
Huma-Air FX Impact vervangende drukmeter

Huma-Air FX Impact vervangende drukmeter

(0)
€ 14,95

Mini pressure gauge 23mm for FX Impact
This 23 mm mini pressure gauge is an one on one replacement for the FX impact factory pressure gauges. Made of solid steel, chrome plated with a 250 bar wide dial scale. The gauge comes with a o-ring that can replace the plastic washer that is under the factory pressure gauge. Due to this o-ring there is enough movement to line up the gauge perfectly in eye position.

Huma-Air FX vervangende drukmeter 26mm (ronde afwerking)

Snel bekijken

Huma-Air FX vervangende drukmeter 26mm (ronde afwerking)

Huma-Air FX vervangende drukmeter 26mm (ronde afwerking)

(0)
€ 19,95

Mini pressure gauge 26 mm. Round model.
This 26 mm round pressure gauge can be used as an replacement for several FX pressure gauges. Made of solid brass body, with a wide dial scale. The gauge comes with an o-ring that can replace the plastic washer that is under the factory pressure gauge. Due to this o-ring there is enough movement to line up the gauge perfectly in eye position.

* This is an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!

Huma-Air FX Wildcat en FX Streamline regulator tester

Snel bekijken

Huma-Air FX Wildcat en FX Streamline regulator tester

Huma-Air FX Wildcat en FX Streamline regulator tester

(0)
€ 14,95

Mini pressure gauge 23mm for FX Wildcat or FX Streamline
This mini pressure gauge is to check the output pressure of your regulator.

How does it work
Unscrew the pressure tube of your rifle. Dryfire the rifle to make sure there is no pressure left in the action.
remove the brass de-presurize screw on the side of the action and replace it with our test gauge.
Then replace the pressure tube again and you can check the output pressure of the regulator after every shot.

Huma-Air FX Wildcat en FX Streamline vervangende drukmeter

Snel bekijken

Huma-Air FX Wildcat en FX Streamline vervangende drukmeter

Huma-Air FX Wildcat en FX Streamline vervangende drukmeter

(0)
€ 19,95

Pressure gauge 28 mm for the FX Wildcat and FX Streamline
This 28 mm pressure gauge can be used as an replacement for the FX Wildcat and FX Streamline factory pressure gauge (Wika) mounted at the front of the pressure tube. It is made of solid brass, chrome plated with a wide dial scale.
The gauge comes with an o-ring that can replace the plastic washer that is under the factory pressure gauge. Due to this o-ring there is enough movement to line up the gauge perfectly in eye position.

* Despite the fact that the scale of the pressure gauge indicates up to 300 bar, you should never exceed the factory advised fill pressure of your rifle!

Huma-Air mini drukmeter 23mm (G1/8 BSP)

Snel bekijken

(0)
Huma-Air mini drukmeter 23mm (G1/8 BSP)

Huma-Air mini drukmeter 23mm (G1/8 BSP)

(0)
€ 14,95

Mini pressure gauge 23 mm. with G1/8 BSP treads suitable and a 250 bar scale.
The housing is made of solid metal that is chrome plated. This 23mm pressure gauge can also be used to replace the original FX Impact manometer and BSA pressure gauges. It has a 1/8 BSP treaded bottom connection, which makes it suitable for several other brands too. An o-ring is included for proper sealing on most airguns. 

This gauge is an one on one replacement for:

  • FX Impact
  • BSA R10
  • BSA Ultra SE
  • BSA Scorpion SE

* This is an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!

Huma-Air mini drukmeter 25mm (G1/8 BSP)

Snel bekijken

(0)
Huma-Air mini drukmeter 25mm (G1/8 BSP)

Huma-Air mini drukmeter 25mm (G1/8 BSP)

(0)
€ 17,95

Mini pressure gauge 25 mm. with G1/8 BSP treads and a 300 bar dial scale.
The housing is made of metal that is chrome plated. This 25mm pressure gauge can also be used to replace the original FX manometer in front of your pressure tube and is also used in several other rifle brands.

* This is an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!

Huma-Air mini drukmeter 26mm ronde afwerking (G1/8 BSP)

Snel bekijken

Huma-Air mini drukmeter 26mm ronde afwerking (G1/8 BSP)

Huma-Air mini drukmeter 26mm ronde afwerking (G1/8 BSP)

(0)
€ 19,95

Mini pressure gauge 26 mm. Round model.
26 mm round pressure gauge with G1/8 BSP back connection. Made of solid brass body, with a wide dial scale of 300 bar, suitable for a continuous working pressure of 250 bar. The gauge comes with an o-ring for assembling the gauge into the socket, due to this o-ring there is enough movement to line up the gauge perfectly in eye position.

 

* This is an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!

Huma-Air Quickfill set met drukmeter voor de Benjamin Marauder

Snel bekijken

Huma-Air Quickfill set met drukmeter voor de Benjamin Marauder

Huma-Air Quickfill set met drukmeter voor de Benjamin Marauder

(0)
€ 79,00

Benjamin Marauder Quickfill Set
Huma-Air quick fill with pressure gauge for the Benjamin Marauder to replace the factory fill connection. This quickfill makes it possible to check the fill pressure of your pressure tube when you have fitted a regulator to your Benjamin Marauder.
The quickfill adapter with the 28mm, wide dial, pressure gauge can be adjusted in several ways so it will always line up perfectly.
It has a dust cover cap that can be turned, so the fill hole will be invisible and covered so it prevents dirt coming in.
We deliver the assembly complete with one of our stainless steel fill probes with a foster male quick connection, so you can fill your rifle with your normal foster female adapter.

Our Benjamin Marauder Quickfill With Pressure Gauge set contains:

  • Pressure tube endcap,  (silver anodized)
  • Pressure gauge assembly body, matte black anodized
  • Dust cover cap, matte black anodized
  • 28mm pressure gauge with wide dial scale
  • Stainless steel, quick connect fill probe

* This quickfill is equipped with an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!


Metura gebruikt cookies alleen om bezoekersaantallen te meten, we slaan geen persoonlijke gegevens op. Onze excuses voor het ongemak.