BSA Accessoires

Huma-Air BSA Ultra SE Tuning Regulator

Huma-Air BSA Ultra SE Tuning Regulator
For the Bsa Ultra SE models we have designed an unique regulator what replaces the original “body adaptor” part of the rifle. It’s made of Chrome Molybdeen steel what is blued so it has the same finish as the original BSA part. Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and  high power FAC models.

After the regulator is placed the pressure gauge still indicates the fill pressure of the main pressure tube. It’s very easy to install on your rifle, just depressurize the rifle, unscrew the body adapter en screw the regulator in it’s place and your are finished. The regulator is vented to to the atmosphere without the need of drilling a hole or what so ever. This guaranties very consistent regulating behavior without creeping up in pellet speed during time!

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• The regulator housing is made of extremely tough 42Cr steel.
• Tested for a working pressure of at least 3x the working pressure of the rifle, for everyone’s safety.
• It uses a long stroke piston that gives great consistency.
• The regulator body and the housing are one piece, so no chance of the regulator moving inside the cylinder.
• DIY fitting is a real option for the most people.
• High quality bluing, same colour as the original BSA pressure tube.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade materials like 42Cr steel and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air BSA Ultra XL Tuning Regulator

Huma-Air BSA Ultra XL Tuning Regulator
For the new BSA Ultra XL  model we have designed a pressure regulator that can be pushed into the pressure tube. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
The regulators come in the standart middle pressure range (MP: 70-150 bar output) covering sub 12 ft/lbs and FAC models. They come preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air BSA vervangende drukmeter 23 mm

Mini pressure gauge 23 mm. for BSA Airrifles.

This 23 mm mini pressure gauge is an one on one replacement for several BSA factory pressure gauges like the BSA R10, BSA Ultra SE and BSA Scorpion SE. 
Made of solid steel, chrome plated with a 250 bar wide dial scale.
The gauge comes with a oring what can replace the plastic washer what is under the factory pressure gauge. Due to this o-ring there is enough movement to line up the gauge perfectly in eye position.

Huma-Air mini drukmeter 23mm (G1/8 BSP)

Mini pressure gauge 23 mm. with G1/8 BSP treads suitable and a 250 bar scale.
The housing is made of solid metal that is chrome plated. This 23mm pressure gauge can also be used to replace the original FX Impact manometer and BSA pressure gauges. It has a 1/8 BSP treaded bottom connection, which makes it suitable for several other brands too. An o-ring is included for proper sealing on most airguns. 

This gauge is an one on one replacement for:

• FX Impact
• BSA R10
• BSA Ultra SE
• BSA Scorpion SE

* This is an universal pressure gauge what can be used on several airguns. Never exceed the factory advised fill pressure of your rifle!

Huma-Air regulator tester (Air Arms, BSA en CZ)

This regulator tester device  is specially designed to test and service our Huma-Air regulators for BSA,  Air Arms S200 and CZ200.  With this model you can test the Huma-Air models below:

• Air Arms S200 external regulator
• Air Arms S200 internal regulator
• BSA Scorpion external regulator
• BSA Ultra MMC external regulator
• BSA Ultra SE regulator
• BSA Scorpion SE regulator
• BSA Internal regulator
• CZ200 external regulator
• CZ200 internal regulator

Check the proper working and cycling, adjust the regulator after a full rebuild or just experiment to find out the best pressure setting of your rifle.
The tester is suitable for a wide range of Huma-Air regulators (see list above) and has a easy to use depressurize screw. It has a large 63 mm oil filled pressure gauge with clear scale in PSI and Bar.
After depresurizing your rifle totally, you can unscrew the pressure tube + regulator from the valve body of the rifle and screw the regulator tester directly into the pressure tube. Then you can presurize your pressure tube again and check the regulator output pressure, the regulator cylce etc by simulating shots by using the de-presurize screw. The input pressure is suitable for 232 bar.

For high durability we have used a combination of anodizided aircraft aluminum for the body and a bronze depresurize screw.