info

Je hebt het minimaal aantal bereikt

Winkelwagen (0)

Er zijn nog geen producten in jouw winkelwagen geplaatst.

Hatsan



Bezig met laden...
Huma-Air Hatsan AT44 Tuning Regulator

Snel bekijken

(1)
Extra levertijd
Huma-Air Hatsan AT44 Tuning Regulator

Huma-Air Hatsan AT44 Tuning Regulator

(1)
€ 95,00

Huma-Air Hatsan AT44 Tuning Regulator
For the Hatsan AT44 we made a tuning regulator that will boost your airrifle's performance to the highest shot consistency and best accuracy. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time. It will fit all the Hatsan AT44 versions.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
Your Hatsan AT44 regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Hatsan BT65 Tuning Regulator

Snel bekijken

(1)
Extra levertijd
Huma-Air Hatsan BT65 Tuning Regulator

Huma-Air Hatsan BT65 Tuning Regulator

(1)
€ 95,00

Huma-Air Hatsan BT65 Tuning Regulator
For the Hatsan BT65 we have a tuning regulator available that will boost your airrifle's performance to the highest shot consistency and best accuracy. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time. It will fit all the Hatsan BT65 versions.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
Your Hatsan BT65 regulator comes preset on the most common pressure setting. It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester. The output pressure range is adjustable from 90-170 bar. 

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Zou u in het opmerkingen veld kunnen aangeven wat de productie datum van de drukcilinder van uw Hatsan is? Deze datum kunt u vinden op de vuldop. In dit opmerkingen veld kunt u tevens aangeven of u een custom power setting wilt. U komt het opmerkingen veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.  
* Tevens graag hieronder aangeven voor welk kalilber u de regulator wilt bestellen.
* De .30 / 7.62mm versie is momenteel niet geschikt voor geweren met een productie datum vanaf 2018.

Huma-Air Hatsan Bullboss Tuning Regulator

Snel bekijken

(0)
Extra levertijd
Huma-Air Hatsan Bullboss Tuning Regulator

Huma-Air Hatsan Bullboss Tuning Regulator

(0)
€ 95,00

Huma-Air Hatsan Bullboss Tuning Regulator
For the Hatsan Bullboss bullpup airrifle we have a pressure regulator available that can be pushed into the pressure tube. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Hatsan Carnivore .30 Tuning Regulator

Snel bekijken

(0)
Extra levertijd
Huma-Air Hatsan Carnivore .30 Tuning Regulator

Huma-Air Hatsan Carnivore .30 Tuning Regulator

(0)
€ 99,95

Huma-Air Hatsan Carnivore Tuning Regulator
For the Hatsan Carnivore .30 (7.62) Big Bore we have a high volume pressure regulator available. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* De .30 / 7.62mm versie is alleen geschikt voor modellen met een productiedatum van voor 2018. U kunt deze datum vinden op de eindkap.
* Als u een custom power setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Hatsan Flash Pup Tuning Regulator

Snel bekijken

(0)
Extra levertijd
Huma-Air Hatsan Flash Pup Tuning Regulator

Huma-Air Hatsan Flash Pup Tuning Regulator

(0)
€ 95,00

Huma-Air Hatsan Flash Pup Tuning Regulator
For the Hatsan Flash Pup we have a regulator available what will convert your "budget" airrifle into an excelent sniper rifle. It will boost the performance to the highest shot consistency and accuracy. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
Your Hatsan Flash regulator comes preset on the most common pressure setting. It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester. The output pressure range is adjustable from 90-170 bar. If you have other wishes please contact us.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Hatsan Flash Tuning Regulator

Snel bekijken

(0)
Extra levertijd
Huma-Air Hatsan Flash Tuning Regulator

Huma-Air Hatsan Flash Tuning Regulator

(0)
€ 95,00

Huma-Air Hatsan Flash Tuning Regulator
For the Hatsan Flash Pup we have a regulator available what will convert your "budget" airrifle into an excelent sniper rifle. It will boost the performance to the highest shot consistency and accuracy. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
Your Hatsan Flash regulator comes preset on the most common pressure setting. It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester. The output pressure range is adjustable from 90-170 bar. If you have other wishes please contact us.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Hatsan Galatian Tuning Regulator

Snel bekijken

(0)
Extra levertijd
Huma-Air Hatsan Galatian Tuning Regulator

Huma-Air Hatsan Galatian Tuning Regulator

(0)
€ 95,00

Huma-Air Hatsan Galatian Tuning Regulator
For the Hatsan Galatian airrifle (also called Hammerli Pneuma) we have a pressure regulator available that can be pushed into the pressure tube. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
Your Hatsan Galatian regulator comes preset on the most common pressure setting. It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester. The output pressure range is adjustable from 90-170 bar. If you have other wishes please contact us.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Zou u in het opmerkingen veld kunnen aangeven wat de productie datum van de drukcilinder van uw Hatsan is? Deze datum kunt u vinden op de vuldop. In dit opmerkingen veld kunt u tevens aangeven of u een custom power setting wilt. U komt het opmerkingen veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.  
* Tevens graag hieronder aangeven voor welk kalilber u de regulator wilt bestellen.

Huma-Air Hatsan Gladius Tuning Regulator

Snel bekijken

(0)
Extra levertijd
Huma-Air Hatsan Gladius Tuning Regulator

Huma-Air Hatsan Gladius Tuning Regulator

(0)
€ 95,00

Huma-Air Hatsan Gladius Tuning Regulator
For the Hatsan Gladius airrifle (also called Hammerli Pneuma) we have a pressure regulator available that can be pushed into the pressure tube. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
Your Hatsan Gladius regulator comes preset on the most common pressure setting. It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester. The output pressure range is adjustable from 90-170 bar. If you have other wishes please contact us.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Zou u in het opmerkingen veld kunnen aangeven wat de productie datum van de drukcilinder van uw Hatsan is? Deze datum kunt u vinden op de vuldop. In dit opmerkingen veld kunt u tevens aangeven of u een custom power setting wilt. U komt het opmerkingen veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.  
* Tevens graag hieronder aangeven voor welk kalilber u de regulator wilt bestellen.

Huma-Air Hatsan Trophy Tuning Regulator

Snel bekijken

(0)
Extra levertijd
Huma-Air Hatsan Trophy Tuning Regulator

Huma-Air Hatsan Trophy Tuning Regulator

(0)
€ 95,00

Huma-Air Hatsan Trophy Tuning Regulator
For the Hatsan Trophy airrifle we have a pressure regulator available that can be pushed into the pressure tube. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maximum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen. Als u een custom power setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.


Metura gebruikt cookies alleen om bezoekersaantallen te meten, we slaan geen persoonlijke gegevens op. Onze excuses voor het ongemak.
Accepteer geselecteerde cookies