Daystate

Huma-Air Daystate Huntsman .177 12 ft/lbs Tuning Regulator

Daystate Huntsman .177 12 ft/lbs Tuning Regulator
For the Daystate Huntsman airrifle we have a pressure regulator available that can be pushed into the pressure tube. It's is specialy designed for the sub 12 ft/lbs - 16 Joule version in .177
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
 
Quality
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Huma-Air Daystate Huntsman FAC Tuning Regulator

Huma-Air Daystate Huntsman FAC Tuning Regulator
For the Daystate Huntsman airrifle in FAC version we have a Huma regulator available that can be placed into the rifle without modifications to your pressure tube. The Daystate Huntsman regulator made by Huma is vented to the atmosphere, so no drilling in the tube and also no creeping up in power during time.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
Designed for a wide pressure range (70-150 bar) to suit all calibers.
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

* This model is not suitable for the older Huntsman models with the pressure tube and hammer housing out of one part
 
Quality
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Daystate Renegade Tuning Regulator

 Huma-Air Daystate Renegade Tuning Regulator
For the Daystate Renegade we can make a very easy to fit pressure regulator that will give you great results imediately!
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Quality
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in. 

Huma-Air Daystate Tsar Tuning Regulator

 

Huma-Air Daystate Tsar Tuning Regulator
For the Daystate Tsar we have a tuning regulator available that will improve your airrifle's performance. This regulator is vented to the atmosphere and is an one on one replacement for your factory regulator. Due to our ultra compact build the regulator will give you more regulated volume available so you can get the same pellet velocity with less pressure.

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
• A constant pellet speed over the full working pressure range.
• Maximum use of the air volume due to our ultra compact build.
• It will give you a full flat shotstring immediately.
• Replacing the factory regulator for the Huma Daystate Tsar regulator will give you the most reliable performance.

Pressure settings of the Daystate Tsar Regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Our advice for choosing the best pressure range for your Huma regulator:

• Low pressure range:        60-110 bar for 16 Joule / 12 ft/lbs models.
• High pressure range:       100-170 bar for all FAC models

Quality Control
Huma regulator's are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven welke power setting u wilt. Als u een custom power setting wilt, geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
 

Huma-Air Daystate Wolverine Tuning Regulator

Huma-Air Daystate Wolverine Tuning Regulator
For the Daystate Wolverine we have made a pressure regulator that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power. They are made for the .22, .25 and of course they are also available for the larger caliber .303 (70 ft/lbs-100 Joule).

* This model regulator is only suitable for rifle's with pressure tube, not suitable for bottled rifles (so no "B" or "C" types)

The benefits

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• It will give you a better shotcount and a full flat shotstring immediately.
• Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
• Often the rifle will make less noise due to better balance in air usage.

 
Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Quality
The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.