info

Je hebt het minimaal aantal bereikt

Winkelwagen (0)

Er zijn nog geen producten in jouw winkelwagen geplaatst.

Benjamin



Bezig met laden...
Huma-Air Benjamin Armada Tuning Regulator

Snel bekijken

(0)
Op voorraad
Huma-Air Benjamin Armada Tuning Regulator

Huma-Air Benjamin Armada Tuning Regulator

(0)
€ 95,00

Benjamin Armada tuning regulator
A pressure regulator what can be used with the original pressure gauge assembly, but it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube!
It will give you a better shotcount and a full flat shotstring immediately.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power, just slide it into the pressure tube following our fitting instructions.

For the real power lovers we have also a XXL volume plenum available to use for .30 calibers or maybe the very heavy .25 pellets. You can select the .30 model in the options.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
  • A constant pellet speed over the full working pressure range.
  • Maxiumum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage.

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Benjamin Armada tuning regulator incl. drukmeter connectie

Snel bekijken

Huma-Air Benjamin Armada tuning regulator incl. drukmeter connectie

Huma-Air Benjamin Armada tuning regulator incl. drukmeter connectie

(0)
€ 97,50

Benjamin Armada tuning regulator
For the Benjamin Armada we have a pressure regulator with a combined pressure gauge connection that can be pushed into the pressure tube. It will give you a better shotcount and a full flat shotstring immediately. The pressure gauge can be screwed inside the regulator body and will indicate the regulated pressure.

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maxiumum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage 

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Benjamin Discovery Tuning Regulator

Snel bekijken

(0)
Op voorraad
Huma-Air Benjamin Discovery Tuning Regulator

Huma-Air Benjamin Discovery Tuning Regulator

(0)
€ 95,00

Benjamin Discovery tuning regulator
For the Benjamin Discovery we have made a unique pressure regulator for excelent shooting. The Discovery regulator made by Huma-Air can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube. If you use the pressure gauge, it will display the regulated pressure of your rifle. These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits

  • Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maxiumum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage 

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and  high power FAC models. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Benjamin Marauder Pistol Tuning Regulator

Snel bekijken

(0)
Op voorraad
Huma-Air Benjamin Marauder Pistol Tuning Regulator

Huma-Air Benjamin Marauder Pistol Tuning Regulator

(0)
€ 95,00

Marauder Pistol or P-rod tuning regulator
Boost the shotcount and consitancy of your P-rod! The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube. If you use the pressure gauge, it will display the regulated pressure of your pistol. These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits

  • Higher accuracy of your pistol due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maxiumum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage

Pressure settings
The regulators come in the standart middle pressure range (MP: 70-150 bar output) covering sub 12 ft/lbs and FAC models. They come preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Benjamin Marauder regulator incl. drukmeter connectie

Snel bekijken

(0)
Op voorraad
Huma-Air Benjamin Marauder regulator incl. drukmeter connectie

Huma-Air Benjamin Marauder regulator incl. drukmeter connectie

(0)
€ 97,50

Benjamin Marauder Tuning Regulator
For the Benjamin Marauder we have a tuning regulator with a combined pressure gauge connection that can be pushed into the pressure tube. It will give your Benjamin Marauder a better shotcount and a full flat shotstring immediately. The pressure gauge can be screwed inside the regulator body and will indicate the regulated pressure.

The benefits

  • Higher accuracy of your Benjamin Marauder due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maxiumum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage.

Pressure settings
Your Marauder regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is equipped with a clear pressure scale label, so you can very easy re-adjust, or fine tune the pressure setting without the need of a regulator pressure tester.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Benjamin Marauder Tuning Regulator

Snel bekijken

(1)
Op voorraad
Huma-Air Benjamin Marauder Tuning Regulator

Huma-Air Benjamin Marauder Tuning Regulator

(1)
€ 95,00

Benjamin Marauder Tuning Regulator
For the Benjamin Marauder airrifle we have designed a pressure regulator what can be used with the original pressure gauge assembly, but it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube! It will give you a better shotcount and a full flat shotstring immediately. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power, just slide it into the pressure tube following our fitting instructions.

* For the real power lovers we have also a XXL volume plenum available to use for .30 calibers or maybe the very heavy .25 pellets. You can select the .30 model in the options

The benefits

  • Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations.
  • A constant pellet speed over the full working pressure range.
  • Maxiumum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage.

Pressure settings
The  regulator comes preset at the most common pressure setting, or we will adjust it according to your personal wishes. The pressure range is adjustable from 70-150 bar. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. After fitting the regulator, always check the powersetting of the rifle and finetune it when needed to stay within legal limits.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Benjamin Maximus Tuning Regulator

Snel bekijken

(0)
Op voorraad
Huma-Air Benjamin Maximus Tuning Regulator

Huma-Air Benjamin Maximus Tuning Regulator

(0)
€ 95,00

Benjamin Maximus tuning regulator
For the Benjamin Maximus we have made a unique pressure regulator for excelent shooting. The regulator can be used with the original pressure gauge assembly, keeping the gauge in his place. But it is also possible to remove the pressure gauge and gauge assembly completely and replace it with the regulator body, so you have even more air volume available in the pressure tube.
If you use the pressure gauge, it will display the regulated pressure of your rifle. These regulators are vented to the atmosphere without any modification to your pressure tube needed. So no drilling in the tube and also no creeping up in power.

The benefits

  • Higher accuracy of your airrifle due to the elimination of the pelletspeed fluctuations
  • A constant pellet speed over the full working pressure range.
  • Maxiumum use of the air volume due to our ultra compact build.
  • It will give you a better shotcount and a full flat shotstring immediately.
  • Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
  • Often the rifle will make less noise due to better balance in air usage 

Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and  high power FAC models. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.


Metura gebruikt cookies alleen om bezoekersaantallen te meten, we slaan geen persoonlijke gegevens op. Onze excuses voor het ongemak.
Accepteer geselecteerde cookies