Regulator accessoires

Huma-Air Hatsan Quick Connect Fill Probe
We all know the issue of having more airrifles and they all have different types of fill probes. Huma-Air now offers a solution for it. We have a Hatsan Quick Connect Fill Probe with a foster male quick connect coupler, so you can now easily swap fill probes in a second, when you want to fill several types of airrifles. With the 4 different base models of Quick Connect Fill Probes available in our store, you are able to fill about 90% of the rifle's brands.

This model fill probe will also fit:

• Kral Airguns
• FX Airguns
• Webley
• Evanix
• RWS Airguns
• Jkhan
• Logan
• RWS
• AGS

As 200/300 bars of pressure is seriously dangerous, we choose for high quality materials only; we make our Huma Quick Connect Fill Probes out of one massive piece of stainless steel. This ensures the highest durability and safety, not to be compared with the soft brass and silver plated plugs on the market.

At the end of your fill hose you can attach one of our foster female quick coupler what makes it easy to swap fill probes in a second. Also a lot of rifles (Marauder, FX Impact, Brocock, Daystate) are equipped with a foster male coupler.

This regulator tester device  is specially designed to test and service our Huma-Air regulators for BSA,  Air Arms S200 and CZ200.  With this model you can test the Huma-Air models below:

• Air Arms S200 external regulator
• Air Arms S200 internal regulator
• BSA Scorpion external regulator
• BSA Ultra MMC external regulator
• BSA Ultra SE regulator
• BSA Scorpion SE regulator
• BSA Internal regulator
• CZ200 external regulator
• CZ200 internal regulator

Check the proper working and cycling, adjust the regulator after a full rebuild or just experiment to find out the best pressure setting of your rifle.
The tester is suitable for a wide range of Huma-Air regulators (see list above) and has a easy to use depressurize screw. It has a large 63 mm oil filled pressure gauge with clear scale in PSI and Bar.
After depresurizing your rifle totally, you can unscrew the pressure tube + regulator from the valve body of the rifle and screw the regulator tester directly into the pressure tube. Then you can presurize your pressure tube again and check the regulator output pressure, the regulator cylce etc by simulating shots by using the de-presurize screw. The input pressure is suitable for 232 bar.

For high durability we have used a combination of anodizided aircraft aluminum for the body and a bronze depresurize screw.