BSA Scorpion 1200 SE External Tuning Regulator
For the scorpion .25 SE models and the Scorpion SE 1200 models we have model regulator available specially for the real power lovers.
This external regulator screws between pressure tube and gauge assembly.
The difference compared to the normal BSA "SE" regulator is that this regulator uses the original pressure gauge body what gives it a lot more regulated volume. So it is specialy made for the .25 scorpion 1200 SE rifle or .22 with extreme power levels.
After assembling, the pressure gauge will indicate the regulated power. It’s very easy to install on your rifle, just depressurize the rifle, unscrew the pressuretube and screw the regulator in it’s place and your are finished.*
For the Scorpion 1200 SE in .177 and .22 you can also choose the BSA "SE" regulator.
The benefits
- The regulator housing is made of extremely tough 42Cr steel,
- Tested for a working pressure of at least 3x the working pressure of the rifle, for everyone’s safety,
- DIY fitting is a real option for the most people,
- High quality bluing, same colour as the original BSA pressure tube,
- Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
- A constant pellet speed over the full working pressure range.
- It will give you a better shotcount and a full flat shotstring immediately.
- Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Pressure settings
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.
Huma-Air Quality Control
The regulator is CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.
* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.
