Artemis

Artemis P15 Power Regulator XL Plenum < 82

Artemis P15 Power Regulator XL Plenum > 82

Huma-Air - Artemis/ Spa P15 , PP750 Tuning Regulator

Huma-Air Artemis M16 Tuning Regulator

For the Artemis (Spa / SMK)  M16 we have a tuning pressure regulator available that replaces the original chinese regulator
It is an one-on-one replacement, just unscrew the old regulator and screw the tuning regulator and you are ready
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and  high power FAC models.

When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;

 
Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. 


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Huma-Air Artemis P10 Tuning Regulator

For the Spa / SMK / Artemis P10 we have a tuning pressure regulator available that replaces the original chinese regulator
It is an one-on-one replacement, just unscrew the old regulator and screw the tuning regulator and you are ready
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.
 

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
Designed for a wide pressure range (70-150 bar) to suit sub 12 ft/lbs (UK) and  high power FAC models.

When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;

 
Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. 


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Huma-Air Spa / Artemis PR900W Tuning Regulator

Spa / Artemis PR900W tuning regulator
For the Spa / Artemis PR900W we have a pressure regulator available what can be fitted into the pressure tube. This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time. The kit is comes with a set of spacer to give the valve return spring more preload and also includes a set of new good quality o-rings to replace the crappy chinese ones. After you have fitted the regulator, your pressure gauge has no function anymore.

The benefits of te PR900W regulator

• Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Designed for a wide pressure range (70-150 bar) output

Pressure settings of the regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. 

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Spa / Artemis M10 Tuning Regulator

For the Spa Artemis M10 we have a pressure regulator available that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time
 

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

 
Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

Huma-Air Spa / Artemis M22 pressure regulator

Huma-Air Spa / Artemis PP700 Tuning Pressure Regulator

Spa / Artemis / Mrodair PP700 tuning regulator
Unfortunately the original "constant pressure valve" of the Spa / Artemis / SMK PP700 series pistol is not always very concistent. So we made a tuning regulator that replaces the original chinese one and you will have a great concistant shotstring in a minute! This Huma-Air regulator is placed inside the pressure tube and stands on the valve house body. The orginal regulator is bridged so it had no more infuence on the shooting behaviour. It is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

The benefits of the PP700 tuning regulator

• Higher accuracy of your pisol due to the elimination of the pelletspeed fluctuations
• A constant pellet speed over the full working pressure range.
• Designed for a wide pressure range 85-150 bar
• Easy to adjust without the need of a regulator tester because of the clear pressure scale on the regulator.

Pressure settings of your PP700 regulator
The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes. It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes. 

If you have a 6 ft/lbs UK version, please note this in the "requested pressure" box so we can make suitable version for you. 

Huma-Air Quality Control
Huma-Air regulators are CNC produced out of high grade aircraft Aluminum and bronze. To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. We only use high-end materials and our belleville springs are designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.

* Gelieve hieronder aan te geven voor welk kalilber u de regulator wilt bestellen en welke setting u wilt. Als u een custom setting wilt geef dit dan aan in het opmerkingen veld. U komt dit veld vanzelf tegen als u verder gaat met bestellen. Als u de standaard setting wilt, vul dan niets in.

Huma-Air Spa Artemis P12 pressure regulator

For the Spa Artemis P12 we have a pressure regulator available that can be pushed into the pressure tube.
This regulator is vented to the atmosphere without any modification to your pressure tube. So no drilling in the tube and also no creeping up in power during time.

 

The benefits:

Higher accuracy of your rifle due to the elimination of the pelletspeed fluctuations
A constant pellet speed over the full working pressure range.
It will give you a better shotcount and a full flat shotstring immediately.
Adding a regulator to your airrifle will probably give you the biggest benefit in the tuning process.
Often the rifle will make less noise due to better balance in air usage 


When you order one of our regulators you will receive:

• Your regulator preset on to your own wishes;
• A pressure scale in Bar’s on the regulator, for fine-tuning or re-adjustment;
• We will include a “Huma regulated” breech sticker;
• Fitting instructions as pdf download

 
Pressure settings

The regulator comes preset on the most common pressure setting, or we will adjust it according to your personal wishes.
It is also equipped with a clear pressure scale label, so you can very easy re-adjust or fine tune the pressure setting suitable to your wishes.


Quality

The regulator is CNC produced out of high grade aircraft Aluminum and bronze.
To guarantee a perfect product, every regulator is manually assembled, tested and adjusted to the requested pressure. 
We only use belleville springs designed for critical applications to achieve the highest repeat accuracy. This gives our regulators a repeat cycle less than 1% difference.